Pro Set


SKU: VAR-PS6 Category: Tags: ,

The Heil Pro Set is designed to meet the exacting standards of world-class Contest and DX operators. The Pro Set is available in two models: Pro Set 6 and Pro Set iC. Both are lightweight, versatile headsets designed for comfort, durability, and, performance. The earpieces are full-sized, with heavily-padded cushions for operator comfort during long operating stints. The ear pad covers are removable for washing, and replacement pads are also available (see our Accessories and Parts page). The Pro Set features Heil Sound’s exclusive phase reversal technology, which allows the user to “move” the incoming signal by engaging the phase-reversal switch; this creates a unique spatial widening sound that can, in some situations, significantly improve copy in a tough DX pile-up.

The speakers in the Pro Set series are 200-Ohm nominal devices, with a -3 dB point at 8000 Hz. This combination reduces hiss found in receiver audio stages. These speakers exhibit medium sensitivity but are easily driven by most rigs by turning the AF Gain control up to about 2 o’clock.

Each Pro Set is equipped with a windscreen for the microphone. The windscreen does not affect the frequency response of the microphone, and it is highly effective in minimizing breath blasts while you’re speaking.

Please see our Adapter Selector to find the right adapter cable to connect the Pro Set to your radio.

Some state laws prohibit the use of headsets while operating a vehicle. Please check with your local regulations and restrictions prior to usage of this product while operating a vehicle.

The Pro Set 6 (PS 6) utilizes the HC-6 dynamic element designed for amateur radio use with most radio rigs including Kenwood and Yaesu. The -3dB points are fixed at 100 Hz and 12 kHz with a sensitivity of -57 dB at 600 ohms output impedance (centered at 1 kHz.) Note: To use dynamic mic elements on vintage radios (requiring a high impedance input of 10k to 30k ohms) will require the use of an XT-1 impedance matching transformer.
The Pro Set iC (PS iC) utilizes the Heil Sound iC electret element designed to be used with ICOM radios. This element utilizes bias power in ICOM radios which addresses low-gain issues that arise when using dynamic elements. The -3dB points are fixed at 80 Hz and 12.5 kHz. The iC element requires +5 volts DC bias power, which all ICOM rigs provide. The iC adapters have no internal DC blocking capacitor so bias voltage can be passed allowing the iC electret element to operate.
Download Product Sheet
  • Generating Element: PS 6 | PS iC
  • Frequency Response: 100 Hz – 12.5 kHz |35 Hz – 12 kHz
  • Polar Pattern: Cardioid |Cardioid
  • Impedance: 600 Ohms |1.5 k ohms
  • Output Level: -57 dB at 1 kHz |-48dB at 1 kHz
  • Weight: 10.6 oz | 10.6 oz
  • Required Adapter: AD-1 Series |AD-1 series


Be the first to review “Pro Set”

Your email address will not be published. Required fields are marked *