Pro Set Elite


SKU: VAR-PSE6 Category: Tags: ,

The Heil Pro Set Elite is a high-quality headset that is designed to provide exceptional transmitting and receive audio quality for amateur radio operators. The Pro Set Elite offers dual-side, highly efficient speakers mounted in acoustically tuned chambers which offer high rejection of outside noise. The exclusive Heil Phase Reversal feature allows the user to move the signal acoustically, which creates a spatial widening of the sound field that makes it easier to ‘see’ a signal inside a pileup while removing listener fatigue during prolonged use. The headset’s speakers fold up for easy storage.

The field-replaceable cushioned ear pads also come with removable cotton covers that can be easily removed for washing. The 6′ coiled cable terminates in a 1/8″ mono plug for the microphone, and a stereo 1/8″ plug for headphone speaker connection. An 1/8″ to 1/4″ adapter is also supplied.

Please see our Adapter Selector to find the right adapter cable to connect the Pro Set Elite to your radio.

Some state laws prohibit the use of headsets while operating a vehicle. Please check with your local regulations and restrictions prior to usage of this product while operating a vehicle.

The Pro Set Elite 6 contains the Heil HC-6 full-range dynamic microphone element. Its -3dB points are fixed at 100 Hz and 12.5 kHz, with a sensitivity of -57 dB at 600 ohms output impedance (centered at 1kHz). The HC-6 response can be equalized to match just about any requirement, from full-range rag chew to bright, articulate audio to cut through noise and pileups in serious contesting and DXing. Note: To use dynamic mic elements on vintage radios (requiring a high impedance input of 10k to 30k ohms) will require the use of an XT-1 impedance matching transformer.
The Pro Set Elite iC contains the Heil iC electret microphone element designed to be used with ICOM radios. This element utilizes bias power in ICOM radios which addresses low-gain issues that arise when using dynamic elements. The -3dB points are fixed at 80 Hz and 12.5 kHz. The iC element requires +5 volts DC bias power, which all iCOM rigs provide. The -3dB points are fixed at 80 Hz and 12.5 kHz.
Download the spec sheet

Generating Element: PSE 6 | PSE iC
Frequency Response: 100 Hz – 12.5 kHz | 35 Hz – 12 kHz
Polar Pattern: Cardioid | Cardioid
Impedance: 600 Ohms | 1.5 k ohms
Output Level: -57 dB at 1 kHz | -48dB at 1 kHz
Weight: 13.8 oz | 13.8 oz
Required Adapter: AD-1 Series | AD-1 series

1 review for Pro Set Elite

  1. WB0OUX

    Using my Proset Elite with my IC-7300 I get unsolicited reports of excellent audio. Used the procedure in the 7300 manual to set things up. Configuration is the same for the Proset Elite and Heil ICM microphone. No adjustment required when going from headset to desk mic.

Add a review

Your email address will not be published. Required fields are marked *